+49 6451 501-0
info@ewikon.com

Home » Products » Hot runner nozzles

Nozzle range

Powerful and variable

Direct to the topic »

Nozzle technology Gating options Nozzle types

EWIKON hot runner nozzles come with a multitude of available flow channel diameters, nozzle lengths and gating options offering utmost flexibility for mould designers.

More information:

 Brochure Product Guide

 Main catalogue download area 

 Operating manual HPS III single nozzles

 Operating manual HPS III hot runner systems

EWIKON nozzle technology – Temperature stable, robust and easy to maintain

1

Process-reliable through direct heating
Coil heaters and thermocouples directly integrated into precision-machined cutouts in the melt bearing pressure tube. Very stable heating with minimised loss resulting in an even temperature profile along the whole length of the nozzle. The even heating of all nozzles guarantees a high process reliability and an excellent system balance.

2

Hardened pressure tubes
For melt pressures up to 2000 bar. Wear-resistant threads for problem-free repeated disassembly of tip insert.

3

Easy maintenance and replacement
​​​​​​​Front installation for easy access and replacement of nozzle after dismantling of cavity plate. Exchangeable tip inserts, heaters and thermocouples.

4

Stainless steel protective tube
Prevents damage to the heater.

5

Quick colour changes
Melt seal directly at the gate. Only a minimum melt volume needs to be exchanged.

Gating options

Various gating options allow utmost flexibility in gating point position and design.

1

Gating with heat conductive tip

2

Valve gating

3

Gating with open flow channel

4

Various versions of gate bushes and screw-on gate bushes including overdimensioned versions to adapt to free form contours

Nozzle types

HPS III-S nozzle

  • The EWIKON standard nozzle for all materials and shot weights.
  • Available in various sizes for open gating and valve gating.
  • Slim version for distances between cavities as small as 12 mm.

Go directly to main catalogue chapter:

Open nozzles:

 HPS III-S open nozzle Ø 3 mm
 HPS III-S open nozzle Ø 4.5 mm
 HPS III-S open nozzle Ø 6 mm
 HPS III-S open nozzle Ø 9 mm
 HPS III-S open nozzle Ø 12 mm
 HPS III-S open nozzle Ø 18 mm

Valve gate nozzles:

 HPS III-S valve gate nozzle Ø 3 mm
 HPS III-S valve gate nozzle Ø 4.5 mm
 HPS III-S valve gate nozzle Ø 6 mm
 HPS III-S valve gate nozzle Ø 9 mm
 HPS III-S valve gate nozzle Ø 12 mm
 HPS III-S valve gate nozzle Ø 18 mm

HPS III-SXE single nozzle

  • The single nozzle solution for reliable processing of all materials including high-temperature thermoplastics.
  • Two separate heaters guarantee a most homogeneous temperature profile.
  • Available in various sizes for open gating.

Go directly to main catalogue chapter:

 HPS III-SXE single nozzle Ø 6 mm
 HPS III-SXE single nozzle Ø 9 mm
 HPS III-SXE single nozzle Ø 12 mm
 HPS III-SXE single nozzle Ø 18 mm

HPS III-NVI single valve gate nozzle

  • The compact single valve gate nozzle with integrated drive unit.
  • Particularly easy installation.

Go directly to main catalogue chapter:

 HPS III-NVI single valve gate nozzle Ø 6 mm
 HPS III-NVI single valve gate nozzle Ø 9 mm
 HPS III-NVI single valve gate nozzle Ø 12 mm
 HPS III-NVI single valve gate nozzle Ø 18 mm

L2X nozzle

  • Screw connection for use in L2X Drop-In systems.
  • Available in various sizes for open gating and valve gating.

Go directly to main catalogue chapter:

Open nozzles:

 L2X open nozzle Ø 6 mm
 L2X open nozzle Ø 9 mm 
 L2X open nozzle Ø 12 mm
 L2X open nozzle Ø 18 mm

Valve gate nozzles:

 L2X valve gate nozzle Ø 6 mm
 L2X valve gate nozzle Ø 9 mm
 L2X valve gate nozzle Ø 12 mm
 L2X valve gate nozzle Ø 18 mm

HPS III-MV multi-tip nozzle

  • For vertical multi-gating of parts.
  • Small parts can be gated simultaneously with close distances between cavities. Multi-point gating of single parts is possible as well.

More information:

 Download brochure

HPS III-MH100 nozzle for side gating

  • For direct side gating.
  • Available as linear (MHL100) or radial (MHR100) version
  • Maximum shot weight 10 g per gate.

Go directly to main catalogue chapter:

 HPS III-MHL100 nozzle linear version
More languages: GER

 HPS III-MHR100 nozzle radial version
More languages: GER

HPS III-MH200 nozzle for side gating

  • For direct side gating.
  • Available as linear (MHL200) or radial (MHR200) version.
  • Maximum shot weight 40 g per gate.

Go directly to main catalogue chapter:

 HPS III-MHL200 nozzle linear version
More languages: GER

 HPS III-MHR200 nozzle radial version
More languages: GER

HPS III-MH111 nozzle for side gating

  • For direct side gating.
  • Particularly slim version for the production of pipettes.
  • Use with adapter nozzle.
  • Maximum shot weight 10 g per gate.

Go directly to main catalogue chapter:

 HPS III-MH111 nozzle
More languages: GER

HPS III-MH112/122 nozzle for side gating

  • For direct side gating in moulds with a low number of cavities.
  • Use with adapter nozzle (MH112) or directly under the manifold (MH122).
  • Maximum shot weight 10 g per gate.

Go directly to main catalogue chapter:

 HPS III-MH112 nozzle
More languages: GER

 HPS III-MH122 nozzle
More languages: GER